About Me

Support your plant care routine with this digital pH and TDS/EC meter set, designed to help you assess water quality for hydroponics, nutrient solutions and general plant care.

The digital pH meter measures the acidity or alkalinity of a liquid, helping you check pH levels when preparing water and nutrient solutions for your plants.

The digital TDS/EC meter measures total dissolved solids (TDS), electrical conductivity (EC) and temperature. These readings can help you assess the dissolved substances and conductivity of water used in hydroponic systems and other plant-growing applications.

With two separate meters, a HOLD function and multiple display modes on the TDS/EC meter, this set offers a practical way to check different aspects of water quality as part of your growing routine.

• Product Type: Digital water quality testing set

• Included Meters: 1 digital pH meter and 1 digital TDS/EC meter
  

• pH Measuring Range: 0.00–14.00 pH

• pH Resolution: 0.01 pH

• Stated pH Accuracy: ±0.01 pH

• TDS Measurement: Measures total dissolved solids (TDS)

• EC Measurement: Measures electrical conductivity (EC)

• Temperature Display: Celsius (°C) and Fahrenheit (°F)

• Display: Digital LCD

• Additional Features: HOLD function and multiple display modes on the TDS/EC meter

• Meter Dimensions: Approximately 15.3 × 3 cm each

• Power: Battery-operated; batteries not included

What's Included

• 1 digital pH meter

• 1 digital TDS/EC meter

• 1 carrying case for the TDS/EC meter

• 3 pH buffer powder sachets labelled 4.01, 6.86 and 9.18
  

Instructions of Use

1. Remove the protective cap.

2. Rinse the electrode with distilled water and gently blot it dry with filter paper.

3. Turn on the meter.

4. Immerse the electrode in the liquid being tested without exceeding the immersion line.

5. Stir gently and wait approximately 30 seconds for the reading to stabilize.

6. After testing, rinse the electrode with clean water and switch off the meter.

7. Replace the protective cap after use.

Care & Storage

• Rinse the pH electrode before and after use as instructed.

• Avoid exceeding the pH meter's immersion line.

• Replace the protective cap after use.

Please Note:

• Batteries: Not included
• Battery Types: CR2032 for the TDS/EC meter and LR44 for the pH meter
• Warranty: No warranty is provided